Regulations & Compliance

Welcome to our seventh and final installment in our IH 101 series! It’s been quite a journey so far, but we definitely saved the best for last. Last time, in Part 6 of our IH 101 blog series “Medical Surveillance – Strengthening Your Last Line of Defense for Worker Health,” we learned the basics of […]

In Part 5 of our IH 101 blog series “Data Analysis – Defining Your Goals & Selecting the Best Metrics“ we learned about effective tools for analyzing your IH data, and the critical importance of defining the purpose of your data analysis. Just generating a lot of statistics that don’t provide valuable insights is a […]

In Part 3 of our IH 101 blog series “Sampling Plans – Moving Beyond Compliance” we learned how to use data obtained during our qualitative exposure assessment (QEA) to help define sampling priorities when establishing your sampling plan. In Part 4, we’ll focus on best practices when working with your IH analytical laboratory to increase […]

In Part 2 of our blog series on Industrial Hygiene Program Management, “QEAs: The Foundation of a Great Industrial Hygiene Program”, we learned the standard and most widely used methodology for performing qualitative exposure assessments (QEAs). This step of performing the risk analysis is a pre-requisite to developing your IH sampling plans in a way […]

If you’re a chemical manufacturer or importer, are you currently meeting requirements for information required in Section 1 of an SDS? During webinars and in-person events, we often get questions from safety professionals, chemical manufacturers and chemical importers regarding the emergency number requirement. Both HazCom2012 in the United States and WHMIS 2015 in Canada require […]

Manual material handling has been part of hands-on work since work has existed. With wear-and-tear on the body being inherent with hands-on work, musculoskeletal disorders (MSDs) have been around for just as long. MSDs occur when the physical and/or mental demand to the worker repeatedly exceeds those capabilities, and inadequate recovery time results in less […]

In Part 1 of our blog series on Industrial Hygiene Program Management, “SEGs: The Foundation of a Great Industrial Hygiene Program”, we learned how to create similar exposure groups (SEGs). This step of characterizing your workplace and forming SEGs is a prerequisite for performing qualitative exposure assessments (QEAs). If you haven’t already, we recommend reviewing […]

By Phil Molé, MPH VelocityEHS is pleased to announce our new guide to help you “Get on the Sunny Side of Safety.” It highlights common safety management challenges and the ways our Safety Management Solution can help you solve them. DOWNLOAD THE GUIDE Being stuck in the “sad safety cycle,” as our guide calls it, […]

SEGs: The Foundation for a Great IH Program For this first session of our IH 101: Introduction to Industrial Hygiene Program Management series, we’re going to take an in-depth look at similar exposure groups (SEGs) to help you understand their critical importance to your IH program. We’ll also offer common-sense guidelines for how to set […]

The hardest part of any continuous improvement process is accurately identifying the reason that risk is present in the system to begin with. This is also the most critical step when implementing improvements. There are four key characteristics that every root cause statement should include to provide quality data that can result in effective solutions. […]