Published Articles & Podcasts

2026

Occupational Health & Safety – January
AI, PSIFs, and the Future of Proactive EHS Risk Management

Safety + Health – January

Implementing an Ergonomics Program

2025
Occupational Health & Safety – November
EHS Professionals Embrace AI as a Tool for Precision, Not Replacement

EHS Leaders – November
The Impact of the Government Shutdown on Workplace Safety

Occupational Health & Safety – October
When Oversight Pauses, Risk Doesn’t: What the OSHA Shutdown Reveals about Safety and AI

Industrial Safety & Hygiene News – October
Beyond the Heat: How AI Can Help Organizations Meet OSHAs Proposed Heat Rule and Protect Workers in Real Time

EHS Leaders – October
The Safety Revolution Arrives in 2026: How AI and Data Will Redefine Workplace Risk

Occupational Health and Safety – September
AI Emerges as the GPS of Workplace Safety, Guiding Professionals Toward Smarter Risk Management

Safety + Health – September
Data analytics solution crowned winner of NSC’s Safety Innovation Challenge

Chemical Engineering Podcast – September
The Future of Process Safety in Light of CSB

Health & Safety International – September
The Rise of the AI-Enhanced Workplace Safety Officer

NAEM Green Tie Blog – August
The Many Ways AI is Improving Workplace Safety

ISHN Podcast – August
The Ramifications of the Chemical Safety Board’s Closure

Manufacturing.Net – August
Why the Chemical Safety Board Matters and How AI Can Fill the Gap If It Disappears

Occupational Health & Safety – August
Proposed Budget Cut to Chemical Safety Board Could Limit OSHA’s Reach

Chemical Processing – August
Navigating the PFAS Maze

Powder & Bulk Solids – July
Eliminating the Chemical Safety Board Raises Industry Concerns

EHS on Tap Podcast- July
What Happens to Chemical Safety Without the CSB?

Manufacturing.net – July
Trump’s Plan to Defund Chemical Safety Board Puts Lives at Risk, Expert Warns

ISHN – July
The New Rules of Ergonomics: What Employers Must Know Now

EHS Today – July
Shutting the Chemical Safety Board Will Endanger Workers and Undermine Safety

Built In – July
How AI Offers VelocityEHS a ‘Generational Opportunity’ to Mitigate Workplace Injuries

EHS Daily Advisor Podcast- June
Getting a Handle on the Current EHS Regulatory Climate

Occupational Health & Safety Magazine – May
Knowing Danger Isn’t Enough — Pinpointing It Is the Key to Safer Workplaces

EHS Daily Advisor – May
Trapped in the Tank: A Wake-Up Call for Contractor Safety

Electric, Construction & Maintenance Magazine – May
Tracking Wearable Safety Tech Trends

EHS Daily Advisor – April
How Extraneous Safety Data Can Harm Workers

Occupational Health and Safety – March
The Ethical Case for Using AI as a Workplace Safety Enhancement

Safety+Health – March
Proactive Safety Management

Industrial Safety & Hygiene News – March
How to Make Workplaces Safer with Help from AI

EHS Today – April
The Evolution of AI in Workplace Safety: The Way, Way Back

Professional Safety – March
Report Explores State of Workplace Safety

EHS Today – February
What Changes Will Happen with OSHA?

EHS Daily Advisor (Podcast) – February
Driving Employee Engagement and Enhancing Safety Culture

Safety + Health – February
The Ergonomics Business Case

Corporate Compliance Insights – February
Major Changes Coming to Workplace Chemical Safety Standards

EHS Advisor – January
How Comprehensive Job Safety Analysis Can Improve Business Risk Management

ISHN – January
VelocityEHS Launches the Industry’s First Fully Integrated EHS Platform

2024

Occupational Health & Safety – October 2024
Answering Your Questions on OSHA’s 2024 Final Rule

Safety+Health – September 2024
Psychological Safety + DEI

Assembly Magazine – September 2024
Aerospace Company Improves Safety on the Assembly Line

EHS Today – September 2024
How to Prepare for OSHA’s New HazCom Rule

Safety+Health – August 2024
Take Your Ergonomics Process 3D for Safety More Accurate Assessments

NAEM: The GreenTie Blog – August 2024
The Continuously Changing Landscape of TRI Reporting

OH&S – May 2024
54 Years of Misinformation: Squat Lifting is Still Not Safer than Stoop Lifting

2023

OH&S – August 2023
Building a Strong Hazard Communication Training Program

OH&S – June 2023
Seeing the Forest for the Trees
w/ Kristi Hames, Senior Solutions Strategist at VelocityEHS

OH&S – May 2023
Stop the Spreadsheets: It’s Time to Mature Your IH Program
w/ Dave Risi, Solution Executive at VelocityEHS

EHS Today – January 2023
Furthering the ESG Conversation
w/ Phil Molé, Principal, Marketing Content at VelocityEHS

NAEM – January 2023
The Future of Machine Learning in EHS and ESG
w/ Phil Molé, Principal, Marketing Content at VelocityEHS

2022

ISHN – September 2022
Let’s debunk common misconceptions about HazCom training
w/ Phil Molé, Principal, Marketing Content at VelocityEHS

ISHN – August 2022
Microlearning boosts retention, flexibility for employees, and cuts costs
w/ Mary Schulz, Product Manager at VelocityEHS

EHS Today – July 2022
Identifying Metrics That Drive a Company’s Ergonomics Process
w/ Christy Lotz, CPE, Senior Global Enterprise Account Executive at VelocityEHS

EHS Today – March 2022
Leading Indicators: Driving Proactive Safety
w/ Eric W. Thompson, CSP, Consultant at VelocityEHS

ISHN – February 2022
The right tools can manage workplace compliance, cut time wasted and mitigate risk
w/ Phil Molé, Principal, Marketing Content at VelocityEHS

Frostbyte Consulting – January 2022
Guidance for Implementing an ESG Program

2021

ISHN – December 2021
Rethinking predictive analysis: Learn how to stop workplace incidents before they occur
w/ Aatish Suman, Machine Learning Scientist at VelocityEHS

ISHN – November 2021
Mobile EHS Technology Tackles Complex Challenges and Encourages More Participation
w/ Mary Schulz, Product Manager at VelocityEHS

Food Logistics – November 2021
Implementing Visibility to Reduce Risk Along the Cold Chain: Managing Risk is About Managing the Controls That Manage the Risk
w/ Alex Apostolou, Principal Solutions Strategist, Risk Management Strategy at VelocityEHS

Supply & Demand Chain Executive – October 2021
Strategies for Successfully Navigating Risk in the New Normal
w/ Alex Apostolou, Principal Solutions Strategist, Risk Management Strategy at VelocityEHS

Plant Services – September 2021
Building a Healthy Workplace Culture at Your Facility
w/ Pat King, VP of VelocityEHS Europe

OH&S – September 2021
Communicating Performance to Increase Industrial Hygiene Program Engagement 
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS

ISHN – August 2021
How to Understand the Complex Intricacies of HazCom Training
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

Industrial Hygiene in the Workplace – May 2021
Breathing Safely: Simplifying Complex Respirator Fit Test Requirements & How Technology Can Help
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS

OH&S – May 2021
The Foundation of a Great Industrial Hygiene Program
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS

ISHN – April 2021
Let’s Move Away From One-Sided Online Safety Training
w/ Susan Amore, Senior Product Manager, Training & Learning at VelocityEHS

EHS Today – March 2021
I’m Not Sure I’m Doing This Right—Home Office Ergonomics
w/ Rick Barker, CPE, CSP and Principal Solutions Strategist at VelocityEHS

EHS Today – March 2021
Understanding the Total Cost of an Injury
w/ Rick Barker, CPE, CSP and Principal Solutions Strategist at VelocityEHS

Risk & Insurance – February 2021
Looking to Build and Grow Your Ergonomics Program? Don’t Miss This National Ergo Conference Session
w/ Jeff Sanford, CPE and Director of Ergonomics Consulting at VelocityEHS

2020

EHS Today – October 2020
COVID-19 and Workplace Injuries: What’s the Connection?
w/ Jennifer Sinkwitts and Rick Barker, CPE, CSP, VelocityEHS

VPPPA The Leader Magazine – Fall 2020
The Top 5 Myths & Truths of Ergonomics
w/ Ryan Cowart, CPE, Managing Consultant at VelocityEHS

ISHN – September 2020
Software Helps Connect as the Pandemic Changes Workplaces
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

OH&S – September 2020
Breaking Down the Silos to Simplify Industrial Hygiene During COVID-19 and Beyond
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS

Safety + Health – August 2020
John Damgaard

OH&S – August 2020
13 Tips for Manufacturing Employees Restarting Work
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS and Bianca Sfalcin, AEP, Ergonomics Engineer at VelocityEHS

OH&S – August 2020
Why Effective Chemical Safety Training Is More Important Than Ever
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

EHS Today – August 2020
Exoskeletons: The Good, the Bad and the Ugly
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS

Risk & Insurance – July 2020
50 Years of Misinformation — Squat Lifting Is Not Safer Than Stoop Lifting
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS

OH&S – June 2020
Leveraging Technology to Drive Workplace Ergonomics
w/ Josiah Allen, CPE, Senior Consultant at VelocityEHS

Risk & Insurance – June 2020
Opioid-Related Overdose Deaths Are Still Devastating Communities; Here’s How Ergonomics Can Help
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS

OH&S – May 2020
Upping Your Industrial Hygiene and Chemical Management Game
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS

Risk & Insurance – May 2020
Teaching Post-Pandemic Resilience: 14 Ergonomic Tips to Bring Workers Back Safely
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS and Bianca Sfalcin, AEP, Ergonomics Engineer at VelocityEHS

ISHN – March 2020
Workers Play a Greater Role in Managing Risks
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS

ISHN – February 2020
Centralized Data Collection Elevates Risk Prevention
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

2019

ISHN – December 2019
HazCom for Multi-Employer Sites
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

EHS Today – November 2019
Using Blended Learning and Roles/Responsibilities to Initiate Action
w/ Jeff Sanford, CPE, Director of Consulting at VelocityEHS

EHS Today – October 2019
Six Ways EHS Software Can Help You Strengthen Industrial Hygiene
w/ Dave Risi, CIH, CSP, Director of Industrial Hygiene Solutions at VelocityEHS

EHS Today – October 2019
The Devastating Consequences of Ignoring Workplace Ergonomics
w/ Blake McGowan, CPE, Ergonomics Engineer and Managing Consultant at VelocityEHS

OH&S – October 2019
Putting Chemical Safety Training to the Test
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

OH&S – September 2019
Implementing an Enterprise-Wide Ergonomics Process
w/ Rick Barker, Senior Consultant and Ergonomics Engineer at VelocityEHSachel Zoky, Associate Consultant and Ergonomics Engineer at VelocityEHS

ISHN – September 2019
Managing Process Changes: Visibility, Collaboration and Workflow Control Are All Key
w/ Matt Airhart, President & COO of VelocityEHS

ISHN – August 2019
7 Key Features of Today’s Cutting-Edge Chemical Management Software
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

OH&S – July/August 2019
Getting It Right: Creating and Deploying an Effective and Compliant Chemical Safety Training Program
w/ Melissa McCaffrey, EHS & Sustainability Expert and Director at VelocityEHS

Facility Executive – June 2019
Factoring In Ergonomic Furniture
w/ Gene Kay, CPE, Director at VelocityEHS

OH&S – May 2019
Chemical Management: Five Ways to Meet the Challenges of IH in a Changing Industry
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

ISHN – May 2019
A New Dashboard For EHS Metrics: Use These Five Strategies To Get The Most From Your Key Performance Indicators
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Safety + Health – March 2019
HazCom: Chemicals from Foreign Suppliers
w/ Kirk Nelson, Systems Administrator of MSDSonline Authoring Services & Nick Stone, MSDSonline Regulatory Specialist

EHS Today – March 2019
Emerging Technologies in Ergonomics: Will You Be Ready?
w/ Deepesh Desai, CPE, Director of Consulting and Ergonomics at VelocityEHS

Modern Materials Handling – February 2019
Manufacturer Reduces Workplace Injuries with Ergonomics System

2018

Environmental Leader – November 2018
OSHA HazCom Standard Changes Are Coming – Are You Ready?(opens in a new tab)(opens in a new tab)
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

ISHN – October 2018
6 Steps to Ensure an Effective HazCom Program(opens in a new tab)(opens in a new tab)
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Chem.Info – August 2018
Managing Change to Drive Chemical Process Safety Management(opens in a new tab)(opens in a new tab)
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Safety + Health – July 2018
Preparing for the HazCom Update(opens in a new tab)(opens in a new tab)
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

ISHN – May 2018
How to Best Leverage Innovative Technology(opens in a new tab)(opens in a new tab)
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS

OH&S – May 2018
Tips for Creating a More Successful Industrial Hygiene Program(opens in a new tab)(opens in a new tab)(opens in a new tab)
w/Zoë Frances, EHS & Sustainability Expert and Product Marketing Director at VelocityEHS

Chem.Info – May 2018
Creating & Maintaining An Effective Chemical Hygiene Plan For Better Safety Regulation Compliance(opens in a new tab)(opens in a new tab)
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

Manufacturing Business Technology – April 2018
A Fresh Look At SaaS EHS Software(opens in a new tab)(opens in a new tab)
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

ISHN – April 2018
High-Risk Ops Require Knowledge & Skills(opens in a new tab)(opens in a new tab)
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Pollution Equipment News – February/March 2018
Streamlining Compliance with EPA’s Leak Detection and Repair (LDAR) Requirements
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

ISHN – January 2018
Short, More Digestible Training Programs Meet Today’s Needs(opens in a new tab)(opens in a new tab)
w/ Brad Harbaugh, EHS & Sustainability Expert and Director at VelocityEHS

2017

National Driller – October 2017
Tips for Job Safety Analysis on Drilling Jobs
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS

IMPO – October 2017
Factory Safety: Understanding Job Hazards Through More Thorough Task Analysis
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS

Chemical Engineering – October 2017
Focus on Mobile Apps: Remote-Access Tool Helps Users Manage Chemical Safety

OH&S – October 2017
Construction Safety: Using Technology to Keep Workers from Falling Through the EHS Cracks

Construction Business Owner – September 2017
Are you Ready for OSHA’s First ITA Submission Deadline?
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

EHS Today – September 2017
Texas Strong: Safety Steps Up to Help Hurricane Harvey Victims

Lab Manager – September 2017
21st Century Safety Solutions
w/ Matt Airhart, President & COO of VelocityEHS

Industrial Maintenance & Plant Operation – August 2017
Seven Tips for Managing Plant Disasters
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

Facility Safety Management – August 2017
Safety Training Under Complex Conditions

Construction Business Owner – June 2017
4 Basic Steps to Conducting a Job Safety Analysis
w/ Bill Murphy, EHS & Sustainability Expert and Senior Director of Business Development at VelocityEHS

Construction Business Owner – May 2017
Changing the Jobsite Safety Game
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Industrial Hygiene News – April 2017
Reducing Fatalities in the Oil & Gas Industry Through Targeted Hazard Elimination Strategies
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Drilling Contractor – March 2017
HSE&T Corner: Involving Employees in JSA Development, Making Corrective Actions Visible Increase Buy-In to Incident Prevention Programs

Safety+Health – February 2017
App for Recording and Reporting Workplace Incidents

EHS Today – February 2017
Leveraging Technology to Ease Regulatory Challenges Facing Construction
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

2016

Canadian Occupational Safety – November 2016
Tools of the Trade: Meeting Management

Construction Executive Risk Management eNewsletter – November 2016
How TSCA Reform Will Shake Up Construction
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

Safety.BLR.com – October 2016
Hazard Communication: SDS and Secondary Label Compliance Following the GHS Deadline
w/ Melissa McCaffrey, Director at VelocityEHS

OH&S – October 2016
Creating an Effective Ergonomics Program
w/ Gene Kay, CPE, (former) Director at VelocityEHS

Industrial Hygiene News – September/October 2016
Ergonomics ROI: Finding a Solution that Fits Your Workforce
w/ Gene Kay, CPE, (former) Director at VelocityEHS

Oil & Gas Financial Journal – September 2016
EHS Management Software: In A Challenging Oil And Gas Market, Additional Investment Can Help Ease The Pressure
w/ Greg Duncan, EHS & Sustainability Expert at VelocityEHS

Facility Safety Management – September 2016
Making HAZMAT Less Scary
w/ Phil N. Molé, EHS & Sustainability Expert at VelocityEHS

Chemical Engineering – September 2016
Mobile Apps for Increasing Process Efficiency
w/ John Colón, Product Manager at VelocityEHS

Construction Business Owner – August 2016
TSCA ‘Hit List’ Targets Many Construction Chemicals
w/ Melissa McCaffrey, Director at VelocityEHS

Canadian Mining Journal – August 2016
The Threat Hiding In Broad Daylight: Protecting Workers Against the Sun’s UV Rays Helps Avert Skin Disease and Absenteeism
w/ Matt Airhart, President & COO of VelocityEHS

ISHN – June 2016
Cookie-Cutter Training Doesn’t Cut It

Facility Executive – May 2016
Office Ergonomics: Finding The Right Fit
w/ Gene Kay, CPE, (former) Director at VelocityEHS

ISHN – May 2016
Product Innovations: Safety Data Mobile App by VelocityEHS

OH&S – May 2016
Ergonomics Software

Roofing Contractor – May 2016
Making Hazard Communication a Priority
w/ Melissa McCaffrey, Director at VelocityEHS

Workplaces Magazine – April 2016
Ergonomics By VelocityEHS

Manufacturing Business Technology – April 2016
The Real Value Of EHS Software
w/ Matt Airhart, President & COO of VelocityEHS

Pharmaceutical Processing – April 2016
How Technology & Plant Connectivity Helps Mitigate Workplace Risk

Disaster Recovery Journal – April 2016
Lessons from Tianjin

Facility Safety Management – March 2016
Improving Technology: Communicating Chemical Hazards to First Responders

Construction Business Owner – March 2016
Use Technology to Face EHS Challenges
w/ Matt Airhart, President & COO of VelocityEHS

NAEM’s The Green Tie Blog – February 2016
Prepare to Engage When Introducing New EHS&S Software
w/ Selin Jessani, (former) Director of Customer Experience at VelocityEHS

Capterra Construction Management Blog – February 2016
The Ultimate Review of Construction Project Management Methodologies

2015

Crain’s Chicago Business – December 2015
Software firm taking block of Motorola Mobility’s space in the Mart

Security Products – December 2015
Perfect Foresight: Making Hazardous Chemical Safety Procedures a Priority