Environmental Compliance

In Part 2 of our blog series on Industrial Hygiene Program Management, “QEAs: The Foundation of a Great Industrial Hygiene Program”, we learned the standard and most widely used methodology for performing qualitative exposure assessments (QEAs). This step of performing the risk analysis is a pre-requisite to developing your IH sampling plans in a way […]

by Phil Molé An employee at a popular chain restaurant recently died due to chemical exposures from a reaction between common, but incompatible, cleaning compounds. This incident, like many others before it, is disturbing because the chemicals used are so common, and tragic because it is avoidable. It’s an unfortunate reminder that HazCom management is […]

The job of an EHS professional is never over. There’s always work that needs doing, including an ever-growing list of tasks we need to complete to address risks and maintain effective workplace safety programs. Making life more difficult, the work has a way of multiplying. Sometimes, it seems that for every item we cross off […]

Welcome to the sixth and final installment in our “Intro to HazCom” series! If you missed our previous posts in this series or want to refresh your memory, just follow the hyperlinks to read about the basics of HazCom (Parts One and Two), the challenges of chemical container labeling (Part Three), the requirements for a […]

Welcome to the latest installment of our ongoing Intro to HazCom series! Some of you might be familiar with previous posts, and are waiting for the latest in the series. If so, your wait is now over. But if you’re asking “what Intro to HazCom series?” and are looking for a broad overview of HazCom […]

The colder months of the year offer a perfect time to re-familiarize yourself with the hazards of ethylene glycol. Its widespread use as an antifreeze and de-icing agent in almost every vehicle on the road means that potential exposures are much more common than you’d think. Read on for more information about ethylene glycol and […]

In our previous post “Intro to Hazard Communication, Part One,” we provided an introductory primer for those of you who may be new to HazCom and needed a little help getting oriented. This post will pick up where our previous one left off, and help you continue on your HazCom journey. Please feel free to […]

By Phil Molé Large scale emergencies, such as the flooding that devastated Texas’ Gulf Coast during Hurricane Harvey in 2017, are often worsened due to failures in emergency planning that place first responders, workers and the general public at risk for exposure to hazardous chemicals. Incomplete knowledge of the identities and hazards of chemicals on-site, […]

Recent changes to Britain’s Control of Major Accident Hazards (COMAH) regulations have introduced new reporting requirements for chemical producers, distributors and consumers in the U.K. Revisions to the REACH and CLP hazard communication standards following GHS adoption have prompted a comprehensive reclassification of chemical hazards throughout the E.U. Chemicals that were not previously classified as […]

What is Hydrogen Peroxide? Hydrogen peroxide was first discovered in the early 19th century, but the pure chemical was not produced until 1894. Today, this chemical is produced in quantities of more than 2 million tons worldwide each year. Hydrogen peroxide is a chemical compound usually produced as a diluted solution. This colorless, slightly viscous […]